EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is actually a remarkably efficient solar controller designed for off-grid solar methods. Determined by multiphase synchronous rectification technology, it guarantees optimized Vitality conversion and technique security for a wide array of photovoltaic (PV) apps.
Critical Options of the EPEVER Tracer AN Series Controller
The Tracer AN series makes use of EPEVER Photo voltaic Demand Controller technological know-how for superior solar energy harvesting. Key attributes consist of:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Innovative MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for Increased battery everyday living.
Liquid crystal display Exhibit with authentic-time facts checking.
A number of Load Management Modes like guide and timer.
Extensive Electronic Protections towards overcharging, over-discharging, short circuits, and reverse polarity.
Move-by-Move Guideline to Putting together the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Ensure all factors are bundled: Tracer AN device, temperature sensor, conversation cables, and user manual.
Validate the product variety and voltage rankings match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Choose a well-ventilated, dry location near the battery bank.
Safe the Tracer AN controller utilizing the furnished mounting brackets.
Retain good clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Constantly stick to correct basic safety protocols and make sure the process is driven off just before connecting elements.
Step one: Link the battery terminals towards the demand controller (beneficial to optimistic, unfavorable to destructive).
Action 2: Join the photo More info voltaic panel array towards the PV enter terminals.
Action 3: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Options
Electrical power on the controller by connecting the battery to start with.
Make use of the LCD Exhibit to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Manual, timer, light-weight Management.
5. Checking and Information Logging
The Tracer AN Collection supports serious-time monitoring using the MT50 remote meter.
Facts may be logged by using the RS485 conversation port making use of computer software like Photo voltaic Station Computer.
Distant monitoring can be done With all the EPEVER WiFi module.
six. Troubleshooting Frequent Issues
Situation 1: No Electricity Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: Over-Voltage Defense
Verify the solar array’s voltage ranking.
Modify procedure parameters if required.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT options within the menu.
Great things about the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification know-how guarantees:
Better Efficiency: Decreased Strength losses during conversion.
Increased Dependability: Secure overall performance underneath variable hundreds.
For a longer time Battery Everyday living: Constant and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technologies is undoubtedly an exceptional choice for optimizing solar energy technology and increasing battery lifestyle. By next the above setup manual, customers can make certain greatest effectiveness and program longevity.