EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN Collection CONTROLLE

EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN Collection CONTROLLE

Blog Article

The EPEVER Tracer AN Series Solar Cost Controller is actually a highly effective photo voltaic controller suitable for off-grid photo voltaic techniques. According to multiphase synchronous rectification know-how, it guarantees optimized Vitality conversion and technique balance for a wide range of photovoltaic (PV) programs.

Important Functions with the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller technological know-how for excellent solar Electricity harvesting. Key functions incorporate:

Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Sophisticated MPPT Algorithm with >99% performance.
Dual-Stage Charging for enhanced battery life.
Liquid crystal display Display screen with real-time data checking.
A number of Load Management Modes which include guide and timer.
In depth Digital Protections versus overcharging, around-discharging, short circuits, and reverse polarity.
Step-by-Stage Manual to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Ensure all components are integrated: Tracer AN unit, temperature sensor, communication cables, and person handbook.
Confirm the design amount and voltage ratings match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Pick a well-ventilated, dry location near the battery financial institution.
Safe the Tracer AN controller using the supplied mounting brackets.
Maintain correct clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Usually observe appropriate basic safety protocols and make sure the program is driven off before connecting factors.

Step 1: Join the battery terminals on the cost controller (good to constructive, unfavorable to unfavorable).
Stage two: Hook up the solar panel array for the PV input terminals.
Step 3: Join the load terminals if using a direct load link.
Move four: Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Power about the controller by connecting the battery first.
Make use of the Liquid crystal display Display screen to navigate the options menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, gentle Regulate.
5. Monitoring and Knowledge Logging
The Tracer AN Sequence supports actual-time monitoring utilizing the MT50 remote meter.
Information may be logged via the RS485 interaction port utilizing program for example Solar Station Computer system.
Remote monitoring is possible Using the EPEVER WiFi module.
six. Troubleshooting Widespread Issues
Issue 1: No Electric power Output

Verify battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Problem 2: In excess of-Voltage Defense

Validate the solar array’s voltage rating.
Adjust system parameters if needed.
Problem three: No Battery Charging

Inspect PV wiring for continuity.
Ensure MPPT settings within the menu.
Great things about the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technological know-how assures:

Bigger Effectiveness: Lessened Vitality losses for the duration of conversion.
Enhanced Reliability: Secure performance below variable loads.
For a longer time Battery Lifestyle: Regular and correct charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an Remarkable choice for optimizing solar energy generation and lengthening battery everyday living. Read more By subsequent the above mentioned set up tutorial, buyers can assure highest efficiency and method longevity.